Using a serial connection from your computer, the text you type to one XBee will be wirelessly transmitted to the other XBee, which will send the text via serial to your other computer.
Of course, the text will also flow in the opposite direction If you have While many of the steps are similar between these two products, there are a few fundamental differences between the See our guide on where to find XBee parts. The beginning or "high" part of the address will be A, Digi's pre-ased range of address space.
The last or "low" part of the address will be different for every radio. For the radio on the right, it's B9E Write down these s, indicating which is the coordinator and which is the router so that you can refer to them while you're working with them.
Note: By default, the XBee will automatically leave command mode if it does not receive any commands in a 10 second period.
Note: You should get an OK response after issuing each command to set parameters, and another OK response when you write the changes to firmware. The other common mistake is not issuing the ATWR command to save your changes, then losing your configuration when the radio is powered down.
However, experience shows that it sometimes takes a few tries to get everything right. It takes only one wrong parameter to throw a wrench in the works. Embedded Systems Connect your devices with versatile modules and powerful single-board computers deed for rapid deployment and scalability.
Networking Systems Maintain a constant flow of data between your devices with secure cellular routers and gateways built for networks of various speeds and sizes. IoT Software and Services IoT applications and world-class expertise to help you build and maintain secure projects for the Internet of Things.